Item | Parameter |
Laser wavelength | 1535nm±10nm |
Max. range capability | ≥5km (to 2.3m×4.6m vehicle or equivalent target, visibility ≥10km, relative humidity ≤60%) |
Min. range capability | ≤50m |
Ranging accuracy | ±1m |
Range resolution | ≤40m |
Accuracy rate | ≥98% |
Ranging frequency | Single time, 1Hz, 5Hz |
Dimension | ≤6.2cm×4.3cm×3.2cm (L×W×H) |
Weight | ≤85g |
Communication type | RS422 |
Power supply | 12V (10V~14V) |
Average power consumption | ≤4W |
Stand-by power consumption | ≤1.8W |
Working temperature | -40℃~+60℃ |
High precision:
For the target with a accuracy rate of ≥98%, the accuracy error of the laser range finder can reach within 1m. For example, for the target with an actual distance of 1000m, the measured value of the laser range finder will be within 999m and 1001m.
Compact design:
The module weighs less than 85g on average, but it perform extraordinarily well in laser ranging.
Low power consumption:
The average power consumption in high intensity working environment is no more than 4W.
Despite the laser range finder emits a safe-band laser for human eyes, it is still recommended to avoid direct laser light into your eyes during power-on.
Do not directly touch the optical lens with your fingers or sharp objects, to avoid scratch of the lens.
Avoid using detergent to clean the optical lens if not necessary, so as to prevent irreversible damage to the lens coating and the performance of the product. If there is dirt on the lens, gently wipe it with a lens cloth.
Do not use the laser range finder module under direct sunlight, and do not store the product under conditions such as high pollution environment and beyond the storage temperature range, so as to avoid adverse effect on its range performance.
When the lase rangefinder module is working to detect short distance target beyond its minimum range capability, please block the laser receiving lens, otherwise the too strong laser echo may cause permanent damage to the detector;
The laser rangefinder module is air-tight designed, but it is still recommended to use the product in the environment of humidity less than 80%, and ensure the use of the environment is clean and hygienic to prolong the service life of the product.
Please pay attention to remove the static electricity of the human body to prevent damage to circuit components.